This indicates the printer is in the Initial Setup mode. The interface connector is located on the back of the printer towards the left side. Font choices, for example, are of this type. Verify that the paper feed selector is in the “F” position. If the tractor is in the “pull” position, push it down to the “push” position by pinching both tractor position shift levers and rotating the tractors downward. Slide the top cover toward the rear of the printer as shown. The mode is entered by turning on the power switch while pressing the [LF] switch.
|Date Added:||3 October 2011|
|File Size:||9.23 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
This indicates the printer is in the Initial Setup mode. Advances to the next column position on the Control Table.
Align the paper horizontally without any slack, by using the mark son kx p1124 smoked plastic cover as a guide. The column indicator lights C1-C6 shows the current setting for that row. Turn the power off, wait kx p1124 moment then turn the power on to set top of form.
Font choices, for kx p1124, are of this type. Make kx p1124 the paper is straight. Since only one font can be current, when one is chosen YES-column indicator light is litall others are “deselected” No-lights are OFF. If the tractor is in the “pull” kx p1124, push it down to the “push” position by pinching both tractor position shift levers and rotating the tractors downward.
Replace the top cover. Enter or exists the Function mode. Then they will be printed in draft mode for approximately 20 minutes.
Release the rear lever and continue rotating until the tractor snaps into place. Pull up the tractors by pinching both tractor position shift levers and rotating the tractor upward. Unlock the tractors by pulling forward on kx p1124 tractor clamping levers.
Continue to guide the paper until you feel resistance. Align the paper sprocket holes with tractor pins and close tractor covers. There are two types of selection: The group type jx in conjunction with other cells all of which are mutually exclusive if kx p1124 is YES, all kx p1124 must be Kx p1124. Rotate the platen know or use the [LF] switch to adjust the paper so that it is at the desired first print lx. The printer has a self test feature which allows the user to test the printer independently of the computer.
kx p1124 The change will not occur until the current line is kx p1124. Replace the top cover so that it is totally forward. Align the center paper support so that it is centered between the tractors.
Verify kx p1124 the paper feed selector is in the “F” position. This releases the paper and allows the paper o1124 kx p1124 positioned manually as required.
Advances to the next row position on the Control Table.
kx p1124 Not operational when the Control Table is not in the above mentioned positions If pressed, error kx p1124 will occur. These key switches allow you to kx p1124 various important features and functions of the printer ;1124 setting the Control Table. Align the paper horizontally without any slack, by using the marks on the rear cabinet as a guide.
Align the center paper support so that it is centered between the tracks.
Printer: Panasonic KX-P | OpenPrinting – The Linux Foundation
This replaces conventional DIP switches. Visually insure the tractor pins kx p1124 in the center of the paper sprocket holes. Bottom and front pull-tractor feed. The printer will print between 0 and 80 on the scale.